SW42DA

4-Way HDMI Switcher with Multi-Channel Dante Audio Breakout

• Features 4 x HDMI inputs which can be switched to the dual HDMI outputs simultaneously• Supporting Dolby Atmos® Technology• Supports HDMI 2.0b 18Gbps specification, including 4K 60Hz 4:4:4 UHD video• Supports distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision• HDMI output 1 replicates the HDMI input signal - up to 4K 60Hz 4:4:4 and 5.1.4ch / 7.1.2ch Dolby Atmos® and DTS-HD multi-channel audio• HDMI output 2 features an optional 4K video down-scaler, and 5.1.4ch / 7.1.2ch to 2ch Dolby Atmos® and DTS-HD audio downmixing • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos®, Dolby Digital Plus and DTS-HD Master Audio transmission• HDMI audio breakout of Dolby Atmos® and DTS-HD to up to 8 channels of Dante audio (7.1ch), with an independent 2 down-mixed channels of Dante audio• HDMI audio breakout of Dolby Atmos® and DTS-HD to up to 10 channels of Dante audio (7.1.2ch / 5.1.4ch)*• HDMI audio breakout to 7.1ch balanced / unbalanced analogue audio outputs• HDMI Dolby Atmos® and DTS-HD 7.1 down-mixing to 2ch balanced and unbalanced audio ouputs• Supports ARC/eARC including breakout to 7.1ch and 2ch downmixed analogue, and Dante audio• Supports: 44.1, 48, 88.2 & 96kHz Dante® sample rates @ 24-bit• Configurable Dante® device latency using Dante® Controller• Supports AES67 RTP audio transport• Control via TCP/IP, web-GUI, RS-232, front panel buttons, and infrared • HDCP 2.3 compliant with advanced EDID management

• The Dante 2ch down-mix channels can be re-allocated to allow for additional height channels (7.1.2ch / 5.1.4ch) ® Dolby Atmos is a registered trademark of Dolby Laboratories Licensing Corporation. • Video Input Connectors: 4 x HDMI Type A, 19-pin, female• Video Output Connectors: 2 x HDMI Type A, 19-pin, female• Audio Output Connectors: 1 x Optical (Toslink), 5 x 5-pin Phoenix connector (8ch and separate 2ch balanced / unbalanced analogue audio), 1 x RJ45, female (100Mbps Dante® network)• EDID: 4-pin DIP switch• TCP/IP Control: 1 x RJ45, female• RS-232 Port: 1 x 3-pin Phoenix connector• IR Input Ports: 1 x 3.5mm stereo jack • Dimensions (W x H x D): 220mm x 214mm x 45mm, without feet or connections• Shipping Weight: 2.6kg (TBC)• Operating Temperature: 32°F to 104°F (0°C to 40°C)• Storage Temperature: -4°F to 140°F (-20°C to 60°C)• Power Supply: Internal 100-240V AC 1 x SW42DA 1 x Remote Control 1 x IR Receiver 1 x 19” Rack Mounting Kit 4 x Feet1 x Quick Reference Card IEC Power Cable(s) Download firmware